Rechargeable Emergency Automatic Light

Real Light Load Shedding

OVERVIEW

The load-shedding ‘Real’ Light switches on when you experience a power failure. The bulb automatically pulls power from its built-in battery, making sure you don’t plunge into darkness.

The unit also has a built-in intelligent daylight sensor so that the light, only comes on when it’s dark and can be removed from the wall outlet and used as a torch. The ‘Real’ Light emits a cool white light for up to 6 hours.

To recharge, plug the device into a compatible AC power outlet (New SA or Euro Type) and the unit will begin charging.

  • Light Automatically switches on when there is a power failure
  • Built-in intelligent daylight sensor so that the light only comes on when it’s dark
    – in Auto mode
  • Lightweight and very portable
  • Can be removed from wall outlet and used as a torch
  • Up to 6 hours run time
  • Rechargeable Lithium Ferro Phosphate (LiFEPO4) battery recharges quickly (recharges in half the run time)
  • Built-in stand to use as a lamp
  • Super bright LED lights
  • Diffuser to spread light evenly
  • Available in a variety of colours
  • Colour temperature: Cool white
  • Battery capacity: 2 000mAhr
  • Includes smart charge Chip Controller for Fast charging PSU with
  • Charge and discharge cycles: 5000
  • Light source: LED x 5
  • Power: 0.5W
  • Colour temperature: Cool white
  • Battery capacity: 2 000mAhr
  • Operating temperature: -5 to +45oC
  • Storage time +365days

SAFETY

  • OVP Over Voltage Protection
  • OCP Over Current Protection
  • OTP Over Temperature Protection

Height: 88mm
Width: 50mm
Depth: 72mm
Weight: 100g
Approx Lux: 16 at 1m

Plug the device into a compatible AC power outlet (New SA or Euro Type). It will begin charging as indicated by an Orange light on the front. When fully charged, this will change to green. The switch on the top of the device has three settings: Auto, Off, On In “Auto” mode, the device will detect a power failure and automatically switch the LED lights on. This will only occur in low light conditions, so that it will not drain the internal battery during a daytime power outage. A Blue LED light indicates the Auto mode is on.

In “On” mode, the LED lights will switch on and the product can be used as a light/torch. The daylight sensing will be deactivated in “On” mode. In “Off” mode the product does not operate and the Auto light will not switch on. It will still charge from the AC outlet and retain charge in the internal battery for the next time you wish to use it. This setting is useful if you need to save battery capacity for later or just need to prevent the light from switching on automatically.

Light indicators:
Orange – device is charging from AC outlet
Green – internal battery is fully charged
Blue – Product is powered and in Auto Mode

PDF icon   Download: The "Real Light" brochure